A Series Brackets

• The product is made by welding or stamping steel profiles to form a single piece. The outer surface is treated with anti-corrosion treatment.
• Depending on the design requirements, it can be used for the fixation of 1, 2 or 3 parallel cables.
• The cable fixing bracket with a sliding structure is protected by a patent and is used for the sliding expansion and contraction of cables, reducing the workload of cable laying and fixation.

The A-type cable support is made by welding steel sections and is used for the ground support and fixation of cables. The height of the illustrated support is determined according to the contract requirements and the actual site needs. The maximum height should not exceed 2 meters. The base plate for the support installation is fixed to the ground through expansion bolts or chemical anchor bolts.

Explanation: 

Usage: This type of bracket is used for the horizontal (flat) fixation of cables. With "A" as the model code, it fixes two cables as A2, three cables as A3, and so on. 

Material selection and process requirements: 

The cable clamp fixing plate is made of 10# channel steel. The length and the distance between the cable clamp installation holes are determined according to the selected cable clamp and the phase spacing. The hole diameter of the installation hole is ∅14. The distance from the return line hole to the cable clamp installation hole is 50mm. The diameter of the return line hole is ∅11. The center distance from the grounding wire hole to the base plate is 60mm. The spacing of the grounding wire hole is 38mm, and the diameter of the grounding wire hole is ∅7.

The base plate is made of 200*50 12mm Q235 steel plate. The hole spacing is 160mm. It is fixed by 4 M12*80 expansion bolts or welding with the embedded iron.